Receptacles

Diese Seite wird demnächst auch in Deutsch zur Verfügung stehen

Standards for Fiber Optic Receptacles	Receptacles for Fiber-Optic Transceivers
	We can also quote custom designs for less important quantities, even with non-standard dimensions of the Zirconia parts.	Swiss Jewel Receptacles are normally built with 1.25mm or 2.5mm Fiber Stubs and Split Sleeves, both made exclusively in high performance Zirconia, however other dimensions are available. SJC takes advantage of the traditional Swiss know-how in large-scale manufacturing of micro-mechanical components. SJC LC-Receptacle standard Optimized for superb mechanical stability. SJC LC-Receptacle short Optimized for best small-form-factor Receptacles versus pigtailed modules Receptacle modules are easier to handle and are typically lower in cost because a fiber pigtail and optical connector are not required. The receptacle has a sleeve to capture and align the incoming connector ferrule. Split sleeves have proofed to be more rugged than solid sleeves. Solid sleeves require very tight tolerances, resulting also in higher cost.
AR coating is applied if very low back reflection is required. SJC’s experienced assembling line and our strict QA procedure guarantee highest flexibility and quality. Example of a custom receptacle with AR coated ball lens.

______________________________________________________________________________
SJC Advanced Ceramics, Swiss Jewel CO. SA., Via del Sole, CH-6598 Tenero, Switzerland
Phone: +41-91-745 61 31 Fax: +41-91-745 61 69 e-mail: sales@swiss-jewel.com